韩国电影爱人免费观看,富春山居图粤语真不卡,倚天屠龙记苏有朋免费完整版,特邀送货员韩剧电影免费完整版

Hello! Welcome to Xiangyang Fengzheng Auto Parts Manufacturing Co., Ltd!
Chinese  |  English
Recommending Products
Contact: Mr.Chen
Tel:0086-15872270911
Address:No.36 Wuxi Road, High-Tech Zone, Xiangyang City, Hubei Province, China. 441004


Hot Line

0086-15997288088
Company Dynamics Position: Home > News Center  > Company Dynamics
Does the manufacturer of heavy truck half shaft sleeve introduce the forging temperature range of fo

Sources:Xiangyang Fengzheng Auto Parts Co., Ltd | PublishDate:2021.12.17

The basic method to determine the forging temperature range of forgings is based on the balance diagram of steel, and then refer to the plasticity diagram, resistance diagram and recrystallization diagram of steel. Through comprehensive analysis of plasticity, quality and deformation resistance, the initial forging temperature and terminal forging temperature are determined. Generally speaking, the forging temperature range of carbon steel can be directly determined according to the iron carbon balance diagram. The forging temperature range of most alloy structural steels can be considered with reference to most carbon steels with the same carbon content. However, for high alloy indium with low plasticity and steel without phase transformation, a reasonable forging temperature range must be determined through experiments. Let's follow the small series of heavy truck half shaft sleeve manufacturers to have a simple understanding and have a look!


- Determination of initial forging temperature


To determine the initial forging temperature of steel, it is necessary to ensure that the steel is not over burned. In addition, factors such as blank structure, forging method and deformation process should also be considered. For example, when ingots are used as billets, the trend of over combustion is small because the as cast structure is relatively stable. Therefore, the initial forging temperature of the ingot is 20-50 ° C higher than that of the same billet and steel. When high-speed hammer precision forging is used, because high-speed deformation will produce great thermal effect, the temperature of blank will rise and cause excessive combustion. Therefore, the initial forging temperature should be about 10 ° C lower than the normal initial forging temperature.


II. Determination of final forging temperature


When determining the terminal forging temperature, it is necessary to ensure that the steel has sufficient plasticity before terminal forging, and make the forging obtain good microstructure and properties. Therefore, the terminal temperature of steel should be higher than the recrystallization temperature to ensure complete recrystallization after forging, so that fine grain structure can be obtained by forging. The forging temperature range of various steels varies greatly. Generally, the forging temperature range of carbon steel is wide, up to 400 ~ 580 ° C.